飞行汽车的概念其实已经不新鲜了，世界范围内多家初创企业都在测试各自的飞行载具，但是量产的飞行汽车目前还没有哪个车企可以实现，这一款可能会成为首款实现量产的飞行汽车，当地时间12月3日，在美国迈阿密的一个展会上，由荷兰PAL-V汽车公司开发的“先锋个人陆空汽车（Pioneer Personal Air Landing Vehicle）”亮相。

PAL-V飞行汽车在道路模式下，车身尺寸为3993*1981*1646mm，能够实现最高160km/h的速度，百公里加速9秒，油箱容积为100升，油耗为8.5升/百公里，可以实现令人印象深刻的1200km续航，通过驾驶……
在飞行模式下，车身尺寸为6126*1981*3200mm，旋翼直径为10.76米，此时需要180米的滑跑助飞，再经过330米的起飞距离（需保持15米障碍物距离）达到平稳飞行。

英文版

English version
In fact, the concept of flying car is not new. Many start-ups around the world are testing their own flying vehicles, but at present, there is no car company that can achieve mass production of flying car. This one may become the first flying car to achieve mass production, which was developed by pal-v automobile company in Holland on December 3 at an exhibition in Miami, USA“ Pioneer personal air landing vehicle "appeared.

Pal-v flying car in road mode, with body size of 3993 * 1981 * 1646mm, can achieve speed of up to 160km / h, acceleration of 100km for 9 seconds, tank volume of 100L, fuel consumption of 8.5l/100km, can achieve impressive 1200km endurance by driving
In the flight mode, the body size is 6126 * 1981 * 3200mm, and the rotor diameter is 10.76m. At this time, it needs 180m taxiing to help the flight, and then after 330m takeoff distance (it needs to maintain 15m obstacle distance) to achieve stable flight.（文编译/飞行汽车  www.feiting553.com）

---

【版权声明】以上内容来源于网络转载，出于传递信息及学习之目的，不代表本网站的观点、立场，本网站不对其真实性负责。未经原作者feiauto允许不得转载本文内容，否则将视为侵权，本站依法保留追究权！www.feiting553.com

【投稿】请把所需要提交的文章投稿至此邮箱：feiauto@126.com

---